DIY

Dad Reveals How He Built This Platform Storage Bed From Kitchen Cabinets

Twisted: Unserious food tastes seriously good.

By Craft Factory

Mar 09, 20195 mins

Dad Reveals How He Built This Platform Storage Bed From Kitchen Cabinets

There are plenty of things you have to consider when looking for a new bed. After all, the importance of a good night's sleep has been well-documented as far as our mental and physical health are concerned.

In short, you want a bed that is comfortable and one that fits in with your personal style. It's also likely that sizing will be taken into consideration. Beds inevitably take up a lot of space, and this can be problematic if your room is on the smaller side. That's why you should think about building a platform storage bed so you can save on space.

Credit: YouTube / HandyDadTV

Seriously, you could end up with this very handy, contemporary storage bed by following the steps below!

Step 1

Credit: YouTube / HandyDadTV

Use these measurements as your base. A standard full-size mattress is 54 inches wide and 75 inches long. Make you sure you use three of the widest cabinets you can purchase from IKEA (24x15x30) - or any other store - to use along the side of the bed and four cabinets of varying heights at the foot of the bed to create steps.

Step 2

Credit: YouTube / HandyDadTV

Assemble all seven of the cabinets but do not install the back on one of the big cabinets. That's so it can be used to access the crawlspace underneath.

Step 3

Credit: YouTube / HandyDadTV

Use wood clamps to screw the cabinets together, with two screws on the front and one screw near the back.

Step 4

Credit: YouTube / HandyDadTV

You will need a 1x4 pine boards for this step. Mark the height of the frame on the wall and use a stud finder to mark the studs. Then drill two pilot holes in the board at every stud before screwing the board to the wall.

Step 5

Credit: YouTube / HandyDadTV

Install another framing board at the back of the cabinets and use a piece of the unused back to fill the space next to the steps. Keep it in place using glue.

Step 6

Credit: YouTube / HandyDadTV

Use another two pine boards to support the center of the bed.

Step 7

Credit: YouTube / HandyDadTV

Using 1x4 pine boards, cut 12 slats the width of the frame. The first one can be used as a pattern to mark the rest. Drill three pilot holes in each of the slats and attach them to framing at each end and the middle.

Step 8

Credit: YouTube / HandyDadTV

Get the mattress out and test your work so far.

Step 9

Credit: YouTube / HandyDadTV

Install the last door on the access cabinet. It's the one with no back and no shelf and will allow you to access the crawl space underneath the bed for storage.

Step 10

Credit: YouTube / HandyDadTV

Dress up the top of the cabinets using affordable panelling. Cut it to size and hold it in place with double-faced carpet tape.

Step 11

Credit: YouTube / HandyDadTV

You might want to install a small light under the bed so you can see inside the storage area.

Check out all steps in much more detail:

And voilà, you have your very own platform bed with plenty of useful storage space, not only in the cabinets but also in the crawlspace underneath the bed.

Advert

Related Article

Amazon Is Selling A DIY Guest House That Can Be Assembled In Eight Hours
DIY

May 15, 2019

5 mins

Amazon Is Selling A DIY Guest House That Can Be Assembled In Eight Hours

Having people over at your house is great, but what happens when you get into the wee hours and they can't (or won't) go home? You've got to put them up for the night, don't you? If you're not fortunate enough to have a spare room, you're going to have…

Mom Makes DIY Lamp Filled With Everything She Found Doing Son's Laundry
DIY

Jul 10, 2019

5 mins

Mom Makes DIY Lamp Filled With Everything She Found Doing Son's Laundry

Deciding what to get someone on their wedding day is no mean feat - particularly if the person getting married happens to be your own son or daughter. I mean, weddings are a sentimental affair with plenty of tears being shed and poignant memories being shared so anything you do…

Doting Dad Transforms Daughter's Wheelchair Into A Police Car To Make A Difficult Situation 'Fun'
DIY

Apr 06, 2019

5 mins

Doting Dad Transforms Daughter's Wheelchair Into A Police Car To Make A Difficult Situation 'Fun'

Many children have to contend with unwelcome additions to their appearance. Whether it is braces, a pair of glasses, or, something more serious like a wheelchair. And because this can single them out, it can have a detrimental effect on their self-esteem. One dad, however, was determined not to let…

craft-factory
craft-factory

Feeling Creative?

Subscribe to our newsletter to receive only good things